skip to Main Content
How To Remove Keys From Keyboard

How to Remove Keys from Keyboard

Many people spend hours of the day before their computers. Probably you and I are no exceptions. Whether we’re working, gaming, or simply browsing the net, we invest quite a significant bit of time interacting with our mouse and keyboard. Due to this, wear and tear are common cases. Your keyboard will suffer the foremost out of all of your peripherals, constantly being touched by (your sometimes but clean) hands. So, dirt gathers on them as a must. Apart from the upper surface of the buttons, a significant amount of filth can be found underneath the keys too. So, it is helpful to occasionally clean out your keyboard to get rid of any debris which will air the board underneath. Whether it is dust, bits of food, hair, or the other dirt, removing these particles can extend the lifetime of your keyboard. Therefore, if I’m a regular PC user, it’s important to grasp the way how do I remove keyboard keys from computers.

Reasons for removing keys from keyboard

On the surface it may sound too much a perfectionist to do so. And it is fairly simple to scrub this stuff out and return your keyboard to sparkling new condition. But it would never give the effective clean as the foremost method of removing the keycaps, exposing all of the dirt and dirt below for a straightforward close up.

Let us now see what may be the other aspects of removing keycaps.

  1. The Best Keyboard Cleaning Process 

As we mentioned above, having the ability to get rid of your keycaps is the best among all other handiest methods in cleaning out the board and switches properly. Oftentimes you may see compressed gas being employed to wash out debris. Vacuum cleaners are also used often for the purpose. Unfortunately, these may only act to get rid of some of the dirt below while pushing the remainder deeper into the keyboard and underneath the switches. And vacuums can’t clean the greasy dirts out. Removing the caps and employing a cotton swab, or something similar, to directly clean the board surely would be the superior method.

  1. Keyboard Rebuilding and Collecting 

There is a large community of keyboard enthusiasts who build, customize and correct various types of mechanical keyboards. Changing out the switches between keyboards  for a “clicky” typing experience, or possibly going with a linear switch for smooth typing are a daily part of mechanical keyboard use. Getting access to the board below the keycaps is where you’ll be able to change out the switches, thus requiring easy removal of the caps.

Another aspect of mechanical keyboard correcting is the replacement of the keycaps themselves. Keycaps become a press release of favor with high-end boards, with various fonts, colors, build quality, and even images being printed on them. Having the ability to get rid of the old keycaps and replacing them with new ones without damage is a vital part of rebuilding and modifying your keyboard.

Other Benefits of Removing Keyboard Keys

Cleaning the caps themselves may also extend the life and appearance of your keyboard. This is often especially helpful if you have got white or light colored keycaps, as dirt and dirt can easily build up and darken the design. Employing a light soap-based cleaning product together with a cotton swab or Q-Tip can help with the cleaning process of the caps. Take care to avoid harsh cleaning products, as these can remove the outer printing on the keycaps. Harsh cleaning products can even fade the colour reckoning on the kind of plastic or coating layer on the cap, and can eventually ruin the general aesthetic.

Necessary Equipments :

  • Flat head screwdriver
  • Spoon
  • Tongs (If your finger is too big to split out keys in naked hand, then use this tongs to remove keys easily)
  • Air-pops ( To clean the keyboard)
  • Surgical spirit (To wash it properly. Also known as rubbing alcohol)

Taking the flat side of these pulling instruments, you’ll be able to then place the tip under the corner of your keycap. Slowly apply pressure until the cap begins to start out its switch. Although these objects are often used, there are some drawbacks. While an object sort of a knife could also be able to fit under the keycap, you run the danger of cutting or scratching the cap (or possibly yourself) within the process. If you’ve got an older keyboard this might not be an enormous issue, but with costlier boards it’s best to use a specialized tool.

  1. Way to remove keys

Before starting make sure that everything is unplugged. Turn off the Laptop, PC or unplug the keyboard from the main device. Then give it a good blow.

Most keys can be detached using the “top down” method. Please remove at your own direction.  Use a flat head screwdriver tool to insert under the upper corner of the key cap. Apply gentle upward pressure while pressing the tool underneath. Some keys must be removed from the bottom up. Use a flat head screwdriver tool to insert under the lower corner of the key cap. Apply gentle upward pressure while pressing the tool underneath. Small can be removed using a similar method. Use a flat head screwdriver tool to insert under the bottom of the key cap. Some large keys may use stabilizer bars and must be removed carefully. Use a flat head screwdriver tool to insert under the side the bottom of the key cap to remove it gently.

If there is unusual resistance when detaching the key, please stop! You may need to use a different method for removal. 

Other methods to remove keys 

Using Keycap pullers

Keycap pullers are exactly what the name implies. Coming in various designs, they are specifically built to get rid of key caps without damage to the keyboard or caps themselves. These are the popular tools for removal among keyboard enthusiasts, and are a risk and hassle free method. There are two main designs of keycap pullers. Wire pullers are the foremost common key cap removers, expanding and fitting around almost any variety of key cap. With the power to lift from opposite corners of the cap, you just lift with light pressure until it’s dislodged. The second design could be a more custom fit plier design, fitting round the edges of the cap. Once round the edges, you merely squeeze the puller and lift straight up. The advantage of this design is that it can even be wont to remove the switches underneath. This eventually can speed up the method without changing tools. Below we will break down some samples of those tools, explaining which puller is best for your keyboard.

Some best models of Keycap pullers :

  1. Oisan keycap pullers

The classic keycap puller, which is the most common tool.

  • Ability to remove up to 3 key caps at a time
  • Compatible with a wide variety of mechanical non-mechanical keyboards
  • Flexible wires for easy use and removal
  1. Stainless steel combo keycap pullers
  • This multi tool is similar to the first, with a wire puller on one side and the previously mentioned plier design on the opposite end of the tool.
  • Stainless steel wire design
  • Ability to pull up to 3 key caps simultaneously
  • Ability to remove Alps, Cherry MX, Topre, and other mechanical keyboard switches.
  1. Hapurs cleaning tool bundle

This bundle of keyboard cleaning tools covers all the bases. Containing a keycap pullers, brush, and air blower.

  • Wire puller capable of removing most keycap styles
  • Air blower to dislodge debris
  • Brush to clean dust above and below keycaps 
  1. Methods to clean dust from the keys

There are a few things to keep in mind after finding the right tools for breaking down your keyboard, when performing maintenance.

Use a hair dryer to blow away dust.

Dust generally found in between the keyboard. This is really difficult to clean with naked hand. So use a hair dryer to clean it smoothly. Just wreck a blow with a necessary angle.

Use a butter knife to clean the keys.

 There is one great method that helps clean keyboards dust without taking them apart. This can be done with surgical sanitizer or if you have not that then make it in a simple way. Take a glass, water and white vinegar. Then using the glass make a solution of water and white vinegar. Then core up this solution with a microfiber cloth or with an air pop and spread all over. Then cover it with a butter knife. Now all you need to do is rub the covered butter knife between the keys. Do it all around the keyboard. After cleaning those make it dry for a several hours.

Use baby wipes to clean the keyboard

Before you get done the business, shake it out. If you are doing it with your laptop then open the screen and grip it well then shake it out. The dust particle will come out easily. Shake it right to left. Then put the keyboard or laptop, take a baby wiper. It will effectively remove all the dark spills, dirt and dust. 

Erase from the keys of grime your keyboard

Over time more and more grime left by your fingerprints builds up on your keyboard button. You can notice this problem can be easily solved with a pencil with the eraser. Gently rub the keys with the eraser. Then vacuum the keyboard to make the proper cleaning.

  1. Reassembling the keyboard

After your keyboard is back to sparkling new condition, switching the button and keycaps is the ultimate step. Refer to your keyboard layout manual when reapplying the keys to avoid mistakes while simultaneously speeding up the reassembly process. Remember to softly reapply the keycaps to avoid breaking the switch below. It’s attached until the foremost effective method would be to line up the keycap and simply move with a regular keystroke.

If you have followed all the steps correctly your keyboard will retain its new appearance. Repeat this process every number of months or PRN, and you may greatly extend the lifespan of your keyboard. Now, you have a keyboard as fine as new. Good luck with it!

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top
×Close search